User Tools

Site Tools


reprap-industrial-v1:knowledge-base

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
reprap-industrial-v1:knowledge-base [2016/01/25 13:54]
Markus Bürgener [Polylactic Acid (PLA)]
reprap-industrial-v1:knowledge-base [2017/01/18 09:51] (current)
Simon Kühling old revision restored (2016/01/25 13:57)
Line 1007: Line 1007:
 |<100% 25% 55% 20%>| |<100% 25% 55% 20%>|
 ^ Feature ​ ^ Setting ​ ^ see also  ^ ^ Feature ​ ^ Setting ​ ^ see also  ^
-| Print bed design ​   | Standard PEI print bed with ABS glue*  | | +| Print bed design ​   | Standard PEI print bed  | | 
-| Print bed temperature ​ | 120°C ​   | | +| Print bed temperature ​ | First layer: 130°C\\ Layers: ​120°C ​   | | 
-| Build chamber temperature ​ | 70°C   | | +| Build chamber temperature ​ | 75°C   | | 
-| Extruder temperature ​ | 275-280°C ​ | | +| Extruder temperature ​ | First layer 285°C\\ Layers: 275°C ​ | | 
-| Speed settings ​ | use standard presets for ABS  |  [[{|width: 8em}#​Acrylonitrile Butadiene Styrene (ABS)|ABS settings]] ​ | +| Speed settings ​ | Reduce first layer speed to 5mm/s\\ all other settings as standard presets for ABS  |  [[{|width: 8em}#​Acrylonitrile Butadiene Styrene (ABS)|ABS settings]] ​ | 
 | Idler lever preload ​ | 3.5mm   ​| ​ [[{|width: 8em}reprap-industrial-v1:​service-guide#​extruder-idler-lever|Setting the idler lever preload]] ​ | | Idler lever preload ​ | 3.5mm   ​| ​ [[{|width: 8em}reprap-industrial-v1:​service-guide#​extruder-idler-lever|Setting the idler lever preload]] ​ |
  
Line 1020: Line 1020:
 |<100% 25% 55% 20%>| |<100% 25% 55% 20%>|
 ^ Feature ​ ^ Setting ​ ^ see also  ^ ^ Feature ​ ^ Setting ​ ^ see also  ^
-| Solvent ​ | Acetone\\ best results when stirred | | +| Solvent ​ | Acetone\\ best results when stirred ​ | | 
-| Warping ​ | very strong, needs sound contact to the accurately leveled print bed  |  [[{|width: 8em}#​warping-prevention|Warping prevention]] ​ |+| Warping ​ | strong, needs sound contact to the accurately leveled print bed  |  [[{|width: 8em}#​warping-prevention|Warping prevention]] ​ |
 | Stringing ​ | medium ​ | | | Stringing ​ | medium ​ | |
 | Support requirements ​ | Needs support structures for overhangs at 45°. Due to the strong layers, support is hard to remove without breaking delicate structures. ​ | | | Support requirements ​ | Needs support structures for overhangs at 45°. Due to the strong layers, support is hard to remove without breaking delicate structures. ​ | |
reprap-industrial-v1/knowledge-base.1453730066.txt.gz · Last modified: 2016/01/25 13:54 (external edit)