User Tools

Site Tools


reprap-industrial-v1:technical-data

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
reprap-industrial-v1:technical-data [2014/08/11 13:28]
Simon Kühling Approved
reprap-industrial-v1:technical-data [2016/07/07 10:20] (current)
Simon Kühling
Line 1: Line 1:
-===== Technical Data ===== +===== Technical Data ===== 
 +==== Hardware revision v1.0 ====
 === General/​dimensions/​weights === === General/​dimensions/​weights ===
-|Housing ​                ​|aluminum-profile framework\\ acrylic glass\\ integrated LED lighting ​ | +{{anchor:​td-general:​}} 
-|Positioning system ​     |extruder head mounted on belt driven H-frame (X/Y-axis) \\ screw driven print table (Z-axis) ​ | +|<75% 40% 60%>| 
-|3D printing technology ​ |Fused Filament Fabrication (FFF)                                      | +| Housing ​                | aluminum-profile framework\\ acrylic glass\\ integrated LED lighting ​ | 
-|Length ​                 |800 mm                                                                | +| Positioning system ​     | extruder head mounted on belt driven H-frame (X/Y-axis) \\ screw driven print table (Z-axis) ​ | 
-|Width ​                  |600 mm                                                                | +| 3D printing technology ​ | Fused Filament Fabrication (FFF)                                      | 
-|Height ​                 |800 mm                                                                | +| Length ​                 | 800mm                                                                | 
-|Weight ​                 |approx. 40 kg (empty) ​                                                ​+| Width                   ​| ​600mm                                                                | 
-|Connection cable        |1.000 mm                                                              ​|+| Height ​                 | 800mm                                                                | 
 +| Weight ​                 | 49kg (empty) ​                                                        ​
 +| Connection cable        | 1.000mm w. Schuko plug and IEC connector ​                            |
  
  
 === Temperatures === === Temperatures ===
-|Extrusion temperature ​     |max. +300 °C  | +{{anchor:​td-temperatures:​}} 
-|Print bed temperature ​     |max. +130 °C  | +|<75% 40% 60%>| 
-|Print chamber temperature ​ |max. +70 °C   |+| Extrusion temperature ​     | max. +300°C ​ | 
 +| Print bed temperature ​     | max. +130°C ​ | 
 +| Print chamber temperature ​ | max. +70°C   |
  
  
-=== Print ===  +=== Hot ends === 
-|Print volume ​                |200 x 185 x 280 mm (10.4 liter                                   | +{{anchor:​td-hot-ends:​}} 
-|Extruder head                ​|dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing ​ | +|<75% 40% 25% 35%>| 
-|Extruder nozzle diameters ​   ​|0.25 0.35 / 0.5 / 0.75 mm                                        ​+| Screwable M6 brass nozzles A/F8 \\ (included in delivery  Bore diameter\\ [mm]  ​ ​Recommended layer height\\ First layer following ​ | 
-|Print bed                    ​|exchangeable 210 x 210 mm PEI/glass fabric/​carbon composite sheet  |  +|:::  2x0.25  ​|  ​0.25 / 0.10 - 0.20  ​
-|Layer height ​                |min. 0.1 mm                                                        ​+|:::  ​2x0.35¹ ​ |  0.35 0.10 - 0.28  | 
-|Reproduction accuracy ​       ​|±0.1 mm                                                            ​| +|:::  1x0.50²  |  ​0.50 / 0.20 - 0.40  ​
-|Tolerance ​                   |±0.1 mm                                                            ​+|:::  1x0.75  ​ 0.60 / 0.25 - 0.60  ​
-|Positioning step-width axes  ​|X=0.028 mm\\ Y=0.019 mm\\ Z=0.003 mm                               |+¹ <wrap lo>​Installed on the left hot end at delivery and preset in the Slic3r profiles available at the [[https://​github.com/​kuehlingkuehling/​RepRap-Industrial-Slic3r-profiles|GitHub repository]] for single and dual extruder prints.</​wrap>​\\ 
 +² <wrap lo>​Installed on the right hot end at delivery and preset in the Slic3r profiles available at the [[https://​github.com/​kuehlingkuehling/​RepRap-Industrial-Slic3r-profiles|GitHub repository]] for support material in dual extruder prints.</​wrap>​
  
 +=== Print ===
 +{{anchor:​td-print:​}}
 +|<75% 40% 60%>|
 +| Print volume ​                | 200x185x280mm (10.4 liter) ​                                   |
 +| Extruder head                | dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing ​ |
 +| Print bed                    | exchangeable 210x210mm PEI/glass fabric/​carbon composite sheet  | 
 +| Layer height ​                | min. 0.1mm                                                        |
 +| Positioning accuracy ​        | ±0.1mm ​                                                           |
 +| Tolerance ​                   | ±0.2mm ​                                                           |
  
-=== Electronics ​=== +=== Material ​=== 
-|Drives ​                       |3 x 1.2 A stepper motor (XYZ positioning drives)\\ 2 x 1.2 A planetary gear drive stepper motor (extruder drives) ​ | +{{anchor:td-material:}} 
-|Stand-alone operating module ​ |integrated capacitive 10” touchscreen controller ​ | +|<75% 40% 60%>
-|Integrated computer ​          ​|BeagleBone Black   +Printable materials ​     ​ABS, PLA, HIPS, PVA, PC, PA12, PET                          ​
-|Machine control ​              |RUMBA board  ​+Filament diameter ​       ​2.85±0.1mm ​                                                
-|Load switching ​               ​|5 x 15 A MOSFET board  ​+Available filament qty.  | 0.75kg spool (200x55mm)\\ 2.30kg spool (296x100mm)  |
-|Power supply unit             |1000 W with DC connector panel, power plug and main switch\\ 110 … 230 V AC, 13-6.5 A, 50/60 Hz  | +
-|Fans                          |3 x 119x119x25 mm, 12 V, 140 m³/h axial fan (heat chamber circulation and cooling system)\\ 1 x 80x80x25, 12 V, 33 m³/h axial fan (air filter | +
-|Network ​                      ​|Ethernet 10/100, RJ45  |+
  
 +=== Power and Electronics ===
 +{{anchor:​td-electronics:​}}
 +|<75% 40% 60%>|
 +| Power consumption (total) ​ | approx. 800W  |
 +| Power supply unit             | 1000W with 12V(DC) connector panel, power plug and main switch 110 … 230V(AC), 13-6.5A, 50/​60Hz ​ |
 +| Drives ​                       | 3x 1.2A stepper motor (XYZ positioning drives)\\ 2x 1.2A planetary gear drive stepper motor (extruder drives) ​ |
 +| Stand-alone operating module ​ | integrated capacitive 10” touchscreen controller ​ |
 +| Integrated computer ​          | BeagleBone Black   |
 +| Machine control ​              | RUMBA microprocessor board  |
 +| Load switching ​               | 5x 15A MOSFET board  |
 +| Fans                          | 3x 119x119x25mm,​ 12V, 140m³/h axial fan (heat chamber circulation and cooling system)\\ 1x 80x80x25, 12V, 33m³/h axial fan (air filter) ​ |
 +| Network ​                      | Ethernet 10/100, RJ45  |
  
-=== Sensor technology ​=== +=== Sensors ​=== 
-|Limit switch\\ H-frame (X/Y) and print table (Z)                   ​|magnetic hall endstops ​ | +{{anchor:​td-sensors:​}} 
-|Filament end recognition ​                                          ​|mechanic limit switch ​ | +|<75% 40% 60%>| 
-|Temperature sensors\\ extruder nozzle, print table, print chamber ​ |300 °C thermistors ​ | +| Limit switch\\ H-frame (X/Y) and print table (Z)                   | magnetic hall endstops ​ | 
- +| Filament end recognition ​                                          | mechanic limit switch ​ | 
- +| Temperature sensors\\ extruder nozzle, print table, print chamber ​ | 300°C ​thermistors ​ |
-=== Material === +
-|Printable materials ​     |ABS, PLA, HIPS, PVA, PC, PA and more                        | +
-|Filament diameter ​       |2.85±0.1 mm                                                 | +
-|Available filament qty.  |0.75 kg spool (200 x 55 mm)\\ 2.30 kg spool (296 x 100 mm)  | +
  
 === Closed loop water cooling system === === Closed loop water cooling system ===
-|Pump           |12 V DC circulation pump with integrated compensation reservoir ​ | +{{anchor:​td-cooling:​}} 
-|Throughput ​    ​|approx. ​210 l/h  | +|<75% 40% 60%>| 
-|Radiator ​      |120 mm full copper radiator ​ | +| Pump           ​| ​12V(DCcirculation pump with integrated compensation reservoir ​ | 
-|Fan            |see [[#​Electronics|electronics]] ​ | +| Throughput ​    | approx. ​210l/h  | 
-|Hose diameter ​ |G1/​4” ​ | +| Radiator ​      ​| ​120mm full copper radiator ​ | 
-|Coolant ​       |Innovatek Protect IP ready-to-use ​ | +| Fan            | see [[#​Electronics|electronics]] ​ | 
-|Coolant qty.   ​|approx. ​250 ml  |+| Hose diameter ​ | G1/​4” ​ | 
 +| Coolant ​       | Innovatek Protect IP ready-to-use ​ | 
 +| Coolant qty.   | approx. ​250ml  |
  
  
 === Air filter === === Air filter ===
-|Air filter ​ |fan duct with exchangeable activated charcoal container ​ | +{{anchor:​td-air-filter:​}} 
-|Fan         |see [[#​Electronics|electronics]] ​ | +|<75% 40% 60%>| 
-|Filling ​    |10 gØ4 mm activated charcoal ​granule ​ |+| Air filter ​ | fan duct with exchangeable activated charcoal container ​ | 
 +| Fan         | see [[#​Electronics|electronics]] ​ | 
 +| Filling ​    ​| ​10gØ4mm activated charcoal ​granules ​ |
  
  
 === Ambient conditions === === Ambient conditions ===
-|Operating temperature ​ |+18 °C ... +27 °C  | +{{anchor:​td-ac:​}} 
-|Storage temperature ​   |+5 °C ... +35 °C   | +|<75% 40% 60%>| 
-|Rel. air humidity ​     |max. 70 %          |+| Operating temperature ​ | +18°C ... +27°C  | 
 +| Storage temperature ​   | +5°C ... +35°C   | 
 +| Rel. air humidity ​     | max. 70%          ​
 +| Setup site             | no excessive formation of dust (e.g. near woodworks, CNC machining centers) ​  |
reprap-industrial-v1/technical-data.1407763692.txt.gz · Last modified: 2014/08/11 13:28 by Simon Kühling