This is an old revision of the document!
Housing | aluminum-profile framework acrylic glass integrated LED lighting |
Positioning system | extruder head mounted on belt driven H-frame (X/Y-axis) screw driven print table (Z-axis) |
3D printing technology | Fused Filament Fabrication (FFF) |
Length | 800 mm |
Width | 600 mm |
Height | 800 mm |
Weight | 49 kg (empty) |
Connection cable | 1.000 mm |
Extrusion temperature | max. +300 °C |
Print bed temperature | max. +130 °C |
Print chamber temperature | max. +70 °C |
Nozzle sizes included in delivery | Bore diameter [mm] | Recommended layer height First layer / following |
2×0.25 | 0.25 / 0.10 - 0.20 | |
2×0.35* | 0.35 / 0.10 - 0.28 | |
1×0.50 | 0.50 / 0.20 - 0.40 | |
1×0.75 | 0.60 / 0.25 - 0.60 |
* Installed at delivery and preset in the Slic3r profiles available at the GitHub repository.
Print volume | 200 x 185 x 280 mm (10.4 liter) |
Extruder head | dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing |
Extruder nozzle diameters | 0.25 / 0.35 / 0.5 / 0.75 mm |
Print bed | exchangeable 210 x 210 mm PEI/glass fabric/carbon composite sheet |
Layer height | min. 0.1 mm |
Reproduction accuracy | ±0.1 mm |
Tolerance | ±0.1 mm |
Positioning step-width axes | X=0.028 mm Y=0.019 mm Z=0.003 mm |
Drives | 3 x 1.2 A stepper motor (XYZ positioning drives) 2 x 1.2 A planetary gear drive stepper motor (extruder drives) |
Stand-alone operating module | integrated capacitive 10” touchscreen controller |
Integrated computer | BeagleBone Black |
Machine control | RUMBA microprocessor board |
Load switching | 5 x 15 A MOSFET board |
Power supply unit | 1000 W with DC connector panel, power plug and main switch 110 … 230 V AC, 13-6.5 A, 50/60 Hz |
Fans | 3 x 119x119x25 mm, 12 V, 140 m³/h axial fan (heat chamber circulation and cooling system) 1 x 80x80x25, 12 V, 33 m³/h axial fan (air filter) |
Network | Ethernet 10/100, RJ45 |
Limit switch H-frame (X/Y) and print table (Z) | magnetic hall endstops |
Filament end recognition | mechanic limit switch |
Temperature sensors extruder nozzle, print table, print chamber | 300 °C thermistors |
Printable materials | ABS, PLA, HIPS, PVA, PC, PA and more |
Filament diameter | 2.85±0.1 mm |
Available filament qty. | 0.75 kg spool (200 x 55 mm) 2.30 kg spool (296 x 100 mm) |
Pump | 12 V DC circulation pump with integrated compensation reservoir |
Throughput | approx. 210 l/h |
Radiator | 120 mm full copper radiator |
Fan | see electronics |
Hose diameter | G1/4” |
Coolant | Innovatek Protect IP ready-to-use |
Coolant qty. | approx. 250 ml |
Air filter | fan duct with exchangeable activated charcoal container |
Fan | see electronics |
Filling | 10 g, Ø4 mm activated charcoal granule |
Operating temperature | +18 °C … +27 °C |
Storage temperature | +5 °C … +35 °C |
Rel. air humidity | max. 70 % |