reprap-industrial-v1:technical-data
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
reprap-industrial-v1:technical-data [2015/08/17 10:54] Markus Bürgener [Hardware revision v1.0] table width equalized |
reprap-industrial-v1:technical-data [2016/07/07 10:20] (current) Simon Kühling |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| ==== Hardware revision v1.0 ==== | ==== Hardware revision v1.0 ==== | ||
| === General/dimensions/weights === | === General/dimensions/weights === | ||
| + | {{anchor:td-general:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| | Housing | aluminum-profile framework\\ acrylic glass\\ integrated LED lighting | | | Housing | aluminum-profile framework\\ acrylic glass\\ integrated LED lighting | | ||
| | Positioning system | extruder head mounted on belt driven H-frame (X/Y-axis) \\ screw driven print table (Z-axis) | | | Positioning system | extruder head mounted on belt driven H-frame (X/Y-axis) \\ screw driven print table (Z-axis) | | ||
| | 3D printing technology | Fused Filament Fabrication (FFF) | | | 3D printing technology | Fused Filament Fabrication (FFF) | | ||
| - | | Length | 800 mm | | + | | Length | 800mm | |
| - | | Width | 600 mm | | + | | Width | 600mm | |
| - | | Height | 800 mm | | + | | Height | 800mm | |
| - | | Weight | 49 kg (empty) | | + | | Weight | 49kg (empty) | |
| - | | Connection cable | 1.000 mm | | + | | Connection cable | 1.000mm w. Schuko plug and IEC connector | |
| === Temperatures === | === Temperatures === | ||
| + | {{anchor:td-temperatures:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| - | | Extrusion temperature | max. +300 °C | | + | | Extrusion temperature | max. +300°C | |
| - | | Print bed temperature | max. +130 °C | | + | | Print bed temperature | max. +130°C | |
| - | | Print chamber temperature | max. +70 °C | | + | | Print chamber temperature | max. +70°C | |
| === Hot ends === | === Hot ends === | ||
| + | {{anchor:td-hot-ends:}} | ||
| |<75% 40% 25% 35%>| | |<75% 40% 25% 35%>| | ||
| - | | Nozzle sizes\\ included in delivery | Bore diameter\\ [mm] | Recommended layer height\\ First layer / following | | + | | Screwable M6 brass nozzles A/F8 \\ (included in delivery) | Bore diameter\\ [mm] | Recommended layer height\\ First layer / following | |
| |::: | 2x0.25 | 0.25 / 0.10 - 0.20 | | |::: | 2x0.25 | 0.25 / 0.10 - 0.20 | | ||
| |::: | 2x0.35¹ | 0.35 / 0.10 - 0.28 | | |::: | 2x0.35¹ | 0.35 / 0.10 - 0.28 | | ||
| Line 31: | Line 34: | ||
| === Print === | === Print === | ||
| + | {{anchor:td-print:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| - | | Print volume | 200 x 185 x 280 mm (10.4 liter) | | + | | Print volume | 200x185x280mm (10.4 liter) | |
| | Extruder head | dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing | | | Extruder head | dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing | | ||
| - | | Extruder nozzle diameters | 0.25 / 0.35 / 0.5 / 0.75 mm | | + | | Print bed | exchangeable 210x210mm PEI/glass fabric/carbon composite sheet | |
| - | | Print bed | exchangeable 210 x 210 mm PEI/glass fabric/carbon composite sheet | | + | | Layer height | min. 0.1mm | |
| - | | Layer height | min. 0.1 mm | | + | | Positioning accuracy | ±0.1mm | |
| - | | Reproduction accuracy | ±0.1 mm | | + | | Tolerance | ±0.2mm | |
| - | | Tolerance | ±0.1 mm | | + | |
| - | | Positioning step-width axes | X=0.028 mm\\ Y=0.019 mm\\ Z=0.003 mm | | + | |
| + | === Material === | ||
| + | {{anchor:td-material:}} | ||
| + | |<75% 40% 60%>| | ||
| + | | Printable materials | ABS, PLA, HIPS, PVA, PC, PA12, PET | | ||
| + | | Filament diameter | 2.85±0.1mm | | ||
| + | | Available filament qty. | 0.75kg spool (200x55mm)\\ 2.30kg spool (296x100mm) | | ||
| - | === Electronics === | + | === Power and Electronics === |
| + | {{anchor:td-electronics:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| - | | Drives | 3 x 1.2 A stepper motor (XYZ positioning drives)\\ 2 x 1.2 A planetary gear drive stepper motor (extruder drives) | | + | | Power consumption (total) | approx. 800W | |
| + | | Power supply unit | 1000W with 12V(DC) connector panel, power plug and main switch 110 … 230V(AC), 13-6.5A, 50/60Hz | | ||
| + | | Drives | 3x 1.2A stepper motor (XYZ positioning drives)\\ 2x 1.2A planetary gear drive stepper motor (extruder drives) | | ||
| | Stand-alone operating module | integrated capacitive 10” touchscreen controller | | | Stand-alone operating module | integrated capacitive 10” touchscreen controller | | ||
| | Integrated computer | BeagleBone Black | | | Integrated computer | BeagleBone Black | | ||
| | Machine control | RUMBA microprocessor board | | | Machine control | RUMBA microprocessor board | | ||
| - | | Load switching | 5 x 15 A MOSFET board | | + | | Load switching | 5x 15A MOSFET board | |
| - | | Power supply unit | 1000 W with DC connector panel, power plug and main switch\\ 110 … 230 V AC, 13-6.5 A, 50/60 Hz | | + | | Fans | 3x 119x119x25mm, 12V, 140m³/h axial fan (heat chamber circulation and cooling system)\\ 1x 80x80x25, 12V, 33m³/h axial fan (air filter) | |
| - | | Fans | 3 x 119x119x25 mm, 12 V, 140 m³/h axial fan (heat chamber circulation and cooling system)\\ 1 x 80x80x25, 12 V, 33 m³/h axial fan (air filter) | | + | |
| | Network | Ethernet 10/100, RJ45 | | | Network | Ethernet 10/100, RJ45 | | ||
| - | + | === Sensors === | |
| - | === Sensor technology === | + | {{anchor:td-sensors:}} |
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| | Limit switch\\ H-frame (X/Y) and print table (Z) | magnetic hall endstops | | | Limit switch\\ H-frame (X/Y) and print table (Z) | magnetic hall endstops | | ||
| | Filament end recognition | mechanic limit switch | | | Filament end recognition | mechanic limit switch | | ||
| - | | Temperature sensors\\ extruder nozzle, print table, print chamber | 300 °C thermistors | | + | | Temperature sensors\\ extruder nozzle, print table, print chamber | 300°C thermistors | |
| - | + | ||
| - | + | ||
| - | === Material === | + | |
| - | |<75% 40% 60%>| | + | |
| - | | Printable materials | ABS, PLA, HIPS, PVA, PC, PA12, PET | | + | |
| - | | Filament diameter | 2.85±0.1mm | | + | |
| - | | Available filament qty. | 0.75kg spool (200x55mm)\\ 2.30kg spool (296x100mm) | | + | |
| === Closed loop water cooling system === | === Closed loop water cooling system === | ||
| + | {{anchor:td-cooling:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| | Pump | 12V(DC) circulation pump with integrated compensation reservoir | | | Pump | 12V(DC) circulation pump with integrated compensation reservoir | | ||
| Line 80: | Line 83: | ||
| === Air filter === | === Air filter === | ||
| + | {{anchor:td-air-filter:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| | Air filter | fan duct with exchangeable activated charcoal container | | | Air filter | fan duct with exchangeable activated charcoal container | | ||
| | Fan | see [[#Electronics|electronics]] | | | Fan | see [[#Electronics|electronics]] | | ||
| - | | Filling | 10g, Ø4mm activated charcoal granule | | + | | Filling | 10g, Ø4mm activated charcoal granules | |
| === Ambient conditions === | === Ambient conditions === | ||
| + | {{anchor:td-ac:}} | ||
| |<75% 40% 60%>| | |<75% 40% 60%>| | ||
| | Operating temperature | +18°C ... +27°C | | | Operating temperature | +18°C ... +27°C | | ||
reprap-industrial-v1/technical-data.1439808871.txt.gz · Last modified: 2015/08/17 10:54 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution-ShareAlike 4.0 International License
