vp75:technical-data
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
vp75:technical-data [2016/12/01 18:42] Simon Kühling created |
vp75:technical-data [2017/01/18 09:21] (current) Simon Kühling correct build sheet size |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Technical Data ====== | + | ===== Technical Data VP75 Additive Manufacturing System ===== |
| + | ==== General / Dimensions / Weights ==== | ||
| + | |<75% 40% 60%>| | ||
| + | | Housing | Sheet metal bent parts\\ White powder-coating\\ Adjustable machine feet | | ||
| + | | Door | Sheet metal frame with acrylic glass cover\\ Magnetic closure\\ Safety switch (optional) | | ||
| + | | Additional features | integrated LED lighting | | ||
| + | | Length | 800 mm | | ||
| + | | Width | 800 mm | | ||
| + | | Height | 2,200 mm | | ||
| + | | Weight | 250 kg (empty) | | ||
| + | | Positioning System | 3-axis delta\\ Automatic three-point leveling | | ||
| + | | Manufacturing Technology | Fused Filament Fabrication (FFF) | | ||
| + | | Compressed Air | 6-8 bar, dry, oil-free | | ||
| + | | Connection cable | 1 m\\ 230 V AC Schuko plug\\ IEC 60320 16A connector | | ||
| + | | Network | Ethernet 10/100, RJ45 | | ||
| + | |||
| + | === Temperatures === | ||
| + | |<75% 40% 60%>| | ||
| + | | Extrusion Temperature | max. +500°C | | ||
| + | | Build Plate Temperature | max. +150°C | | ||
| + | | Build Chamber Temperature | max. +80°C | | ||
| + | |||
| + | |||
| + | === Building Capacities === | ||
| + | |<75% 40% 60%>| | ||
| + | | Build Volume | 75 liter\\ Height: 600 mm\\ Build plate diameter: 400 mm | | ||
| + | | Extruder head | Encapsulated high-temperature single nozzle\\ | | ||
| + | | Build Plate | Exchangeable continuous-use PEI sheet (∅476 mm) on vacuum table | | ||
| + | | Filament diameter | 1.75±0.1mm | | ||
| + | | Minimum layer resolution | 0.1mm | | ||
| + | | Positioning accuracy | ±0.1mm | | ||
| + | | Approx. Tolerance | ±0.2mm | | ||
| + | |||
| + | |||
| + | |||
| + | === Power and Electronics === | ||
| + | |<75% 40% 60%>| | ||
| + | | Power consumption (total) | 3600 W max. | | ||
| + | | Power supply unit | 3600 W, 100 … 230 V(AC) input\\ with power plug and main switch\\ 16 A\\ 50/60Hz | | ||
| + | | Drives | 3x 2 A stepper motor (XYZ positioning drives) | | ||
| + | |::: | 1x 1.2 A stepper motor (extruder drive) | | ||
| + | | Hot end | 24 V, 80 W integrated heating element | | ||
| + | | Build plate heating | 1000 W wired silicone heating pad | | ||
| + | | Chamber heating | 2000 W heating resistor | | ||
| + | | Chamber lighting | 2x 4 W LED array, 6.500K | | ||
| + | | Stand-alone operating module | integrated capacitive 10” touchscreen controller | | ||
| + | | Integrated computer | Quad core 1GHz CPU | | ||
| + | |||
| + | === Sensors === | ||
| + | |<75% 40% 60%>| | ||
| + | | Limit switch axes vertical position | inductive poximity endstops | | ||
| + | | Temperature sensors | 800 °C thermocouple | | ||
| + | |||
| + | === Compressed Air Supply === | ||
| + | |<75% 40% 60%>| | ||
| + | | Throughput | 80 l/min | | ||
| + | | Condition | 6-8 bar, dry, oil-free | | ||
| + | |||
| + | === Ambient conditions === | ||
| + | |<75% 40% 60%>| | ||
| + | | Operating temperature | +18°C ... +27°C | | ||
| + | | Storage temperature | +5°C ... +35°C | | ||
| + | | Rel. air humidity | max. 70% | | ||
| + | | Setup site | no excessive formation of dust (e.g. near woodworks, CNC machining centers) | | ||
vp75/technical-data.1480617748.txt.gz · Last modified: 2016/12/01 18:42 by Simon Kühling
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution-ShareAlike 4.0 International License
