vp75:technical-data
This is an old revision of the document!
Technical Data VP75 Additive Manufacturing System
General / Dimensions / Weights
| Housing | Sheet metal bent parts White powder-coating Adjustable machine feet |
| Door | Sheet metal frame with acrylic glass cover Magnetic closure Safety switch (optional) |
| Additional features | integrated LED lighting |
| Length | 800 mm |
| Width | 800 mm |
| Height | 2,200 mm |
| Weight | 250 kg (empty) |
| Positioning System | 3-axis delta Automatic three-point leveling |
| Manufacturing Technology | Fused Filament Fabrication (FFF) |
| Compressed Air | 6-8 bar, dry, oil-free |
| Connection cable | 1 m 230 V AC Schuko plug IEC 60320 16A connector |
| Network | Ethernet 10/100, RJ45 |
Temperatures
| Extrusion Temperature | max. +500°C |
| Build Plate Temperature | max. +150°C |
| Build Chamber Temperature | max. +80°C |
Building Capacities
| Build Volume | 75 liter Height: 600 mm Build plate diameter: 400 mm |
| Extruder head | Encapsulated high-temperature single nozzle |
| Build Plate | Exchangeable continuous-use PEI sheet (∅600 mm) on vacuum table |
| Filament diameter | 1.75±0.1mm |
| Minimum layer resolution | 0.1mm |
| Positioning accuracy | ±0.1mm |
| Approx. Tolerance | ±0.2mm |
Power and Electronics
| Power consumption (total) | 3600 W max. |
| Power supply unit | 3600 W, 100 … 230 V(AC) input with power plug and main switch 16 A 50/60Hz |
| Drives | 3x 2 A stepper motor (XYZ positioning drives) |
| 1x 1.2 A stepper motor (extruder drive) | |
| Hot end | 24 V, 80 W integrated heating element |
| Build plate heating | 1000 W wired silicone heating pad |
| Chamber heating | 2000 W heating resistor |
| Chamber lighting | 2x 4 W LED array, 6.500K |
| Stand-alone operating module | integrated capacitive 10” touchscreen controller |
| Integrated computer | Quad core 1GHz CPU |
Sensors
| Limit switch axes vertical position | inductive poximity endstops |
| Temperature sensors | 800 °C thermocouple |
Compressed Air Supply
| Throughput | 80 l/min |
| Condition | 6-8 bar, dry, oil-free |
Ambient conditions
| Operating temperature | +18°C … +27°C |
| Storage temperature | +5°C … +35°C |
| Rel. air humidity | max. 70% |
| Setup site | no excessive formation of dust (e.g. near woodworks, CNC machining centers) |
vp75/technical-data.1484731173.txt.gz · Last modified: 2017/01/18 09:19 by Simon Kühling
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution-ShareAlike 4.0 International License
