===== Technical Data VP75 Additive Manufacturing System =====
==== General / Dimensions / Weights ====
|<75% 40% 60%>|
| Housing                 | Sheet metal bent parts\\ White powder-coating\\ Adjustable machine feet  |
| Door                    | Sheet metal frame with acrylic glass cover\\ Magnetic closure\\ Safety switch (optional)  |
| Additional features     | integrated LED lighting  |
| Length                  | 800 mm    |
| Width                   | 800 mm    |
| Height                  | 2,200 mm    |
| Weight                  | 250 kg (empty)  |
| Positioning System      | 3-axis delta\\ Automatic three-point leveling  |
| Manufacturing Technology  | Fused Filament Fabrication (FFF)  |
| Compressed Air  | 6-8 bar, dry, oil-free |
| Connection cable        | 1 m\\ 230 V AC Schuko plug\\ IEC 60320 16A connector  |
| Network                 | Ethernet 10/100, RJ45  |

=== Temperatures ===
|<75% 40% 60%>|
| Extrusion Temperature      | max. +500°C  |
| Build Plate Temperature      | max. +150°C  |
| Build Chamber Temperature  | max. +80°C   |


=== Building Capacities ===
|<75% 40% 60%>|
| Build Volume                 | 75 liter\\ Height: 600 mm\\ Build plate diameter: 400 mm  |
| Extruder head                | Encapsulated high-temperature single nozzle\\   |
| Build Plate                  | Exchangeable continuous-use PEI sheet (∅476 mm) on vacuum table | 
| Filament diameter            | 1.75±0.1mm   |
| Minimum layer resolution     | 0.1mm                                                        |
| Positioning accuracy         | ±0.1mm                                                            |
| Approx. Tolerance            | ±0.2mm                                                            |



=== Power and Electronics ===
|<75% 40% 60%>|
| Power consumption (total)     | 3600 W max. |
| Power supply unit             | 3600 W, 100 … 230 V(AC) input\\ with power plug and main switch\\ 16 A\\ 50/60Hz |
| Drives                        | 3x 2 A stepper motor (XYZ positioning drives)  |
|::: | 1x 1.2 A stepper motor (extruder drive)  |
| Hot end                       | 24 V, 80 W integrated heating element    |
| Build plate heating           | 1000 W wired silicone heating pad                   |
| Chamber heating               | 2000 W heating resistor  |
| Chamber lighting              | 2x 4 W LED array, 6.500K                                     |
| Stand-alone operating module  | integrated capacitive 10” touchscreen controller  |
| Integrated computer           | Quad core 1GHz CPU   |

=== Sensors ===
|<75% 40% 60%>|
| Limit switch axes vertical position          | inductive poximity endstops  |
| Temperature sensors                | 800 °C thermocouple  |

=== Compressed Air Supply ===
|<75% 40% 60%>|
| Throughput     | 80 l/min  |
| Condition     | 6-8 bar, dry, oil-free  |

=== Ambient conditions ===
|<75% 40% 60%>|
| Operating temperature  | +18°C ... +27°C  |
| Storage temperature    | +5°C ... +35°C   |
| Rel. air humidity      | max. 70%          |
| Setup site             | no excessive formation of dust (e.g. near woodworks, CNC machining centers)   |