Technical Data

Hardware revision v1.0

General/dimensions/weights

Housing aluminum-profile framework
acrylic glass
integrated LED lighting
Positioning system extruder head mounted on belt driven H-frame (X/Y-axis)
screw driven print table (Z-axis)
3D printing technology Fused Filament Fabrication (FFF)
Length 800mm
Width 600mm
Height 800mm
Weight 49kg (empty)
Connection cable 1.000mm w. Schuko plug and IEC connector

Temperatures

Extrusion temperature max. +300°C
Print bed temperature max. +130°C
Print chamber temperature max. +70°C

Hot ends

Screwable M6 brass nozzles A/F8
(included in delivery)
Bore diameter
[mm]
Recommended layer height
First layer / following
2×0.25 0.25 / 0.10 - 0.20
2×0.35¹ 0.35 / 0.10 - 0.28
1×0.50² 0.50 / 0.20 - 0.40
1×0.75 0.60 / 0.25 - 0.60

¹ Installed on the left hot end at delivery and preset in the Slic3r profiles available at the GitHub repository for single and dual extruder prints.
² Installed on the right hot end at delivery and preset in the Slic3r profiles available at the GitHub repository for support material in dual extruder prints.

Print

Print volume 200x185x280mm (10.4 liter)
Extruder head dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing
Print bed exchangeable 210x210mm PEI/glass fabric/carbon composite sheet
Layer height min. 0.1mm
Positioning accuracy ±0.1mm
Tolerance ±0.2mm

Material

Printable materials ABS, PLA, HIPS, PVA, PC, PA12, PET
Filament diameter 2.85±0.1mm
Available filament qty. 0.75kg spool (200x55mm)
2.30kg spool (296x100mm)

Power and Electronics

Power consumption (total) approx. 800W
Power supply unit 1000W with 12V(DC) connector panel, power plug and main switch 110 … 230V(AC), 13-6.5A, 50/60Hz
Drives 3x 1.2A stepper motor (XYZ positioning drives)
2x 1.2A planetary gear drive stepper motor (extruder drives)
Stand-alone operating module integrated capacitive 10” touchscreen controller
Integrated computer BeagleBone Black
Machine control RUMBA microprocessor board
Load switching 5x 15A MOSFET board
Fans 3x 119x119x25mm, 12V, 140m³/h axial fan (heat chamber circulation and cooling system)
1x 80x80x25, 12V, 33m³/h axial fan (air filter)
Network Ethernet 10/100, RJ45

Sensors

Limit switch
H-frame (X/Y) and print table (Z)
magnetic hall endstops
Filament end recognition mechanic limit switch
Temperature sensors
extruder nozzle, print table, print chamber
300°C thermistors

Closed loop water cooling system

Pump 12V(DC) circulation pump with integrated compensation reservoir
Throughput approx. 210l/h
Radiator 120mm full copper radiator
Fan see electronics
Hose diameter G1/4”
Coolant Innovatek Protect IP ready-to-use
Coolant qty. approx. 250ml

Air filter

Air filter fan duct with exchangeable activated charcoal container
Fan see electronics
Filling 10g, Ø4mm activated charcoal granules

Ambient conditions

Operating temperature +18°C … +27°C
Storage temperature +5°C … +35°C
Rel. air humidity max. 70%
Setup site no excessive formation of dust (e.g. near woodworks, CNC machining centers)