reprap-industrial-v1:technical-data [Kühling&Kühling Documentation]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Technical Data =====
==== Hardware revision v1.0 ====
=== General/dimensions/weights ===
{{anchor:td-general:}}
|<75% 40% 60%>|
| Housing                 | aluminum-profile framework\\ acrylic glass\\ integrated LED lighting  |
| Positioning system      | extruder head mounted on belt driven H-frame (X/Y-axis) \\ screw driven print table (Z-axis)  |
| 3D printing technology  | Fused Filament Fabrication (FFF)                                      |
| Length                  | 800mm                                                                |
| Width                   | 600mm                                                                |
| Height                  | 800mm                                                                |
| Weight                  | 49kg (empty)                                                         |
| Connection cable        | 1.000mm w. Schuko plug and IEC connector                             |


=== Temperatures ===
{{anchor:td-temperatures:}}
|<75% 40% 60%>|
| Extrusion temperature      | max. +300°C  |
| Print bed temperature      | max. +130°C  |
| Print chamber temperature  | max. +70°C   |


=== Hot ends ===
{{anchor:td-hot-ends:}}
|<75% 40% 25% 35%>|
| Screwable M6 brass nozzles A/F8 \\ (included in delivery)  |  Bore diameter\\ [mm]  |  Recommended layer height\\ First layer / following  |
|::: |  2x0.25  |  0.25 / 0.10 - 0.20  |
|::: |  2x0.35¹  |  0.35 / 0.10 - 0.28  |
|::: |  1x0.50²  |  0.50 / 0.20 - 0.40  |
|::: |  1x0.75  |  0.60 / 0.25 - 0.60  |
¹ <wrap lo>Installed on the left hot end at delivery and preset in the Slic3r profiles available at the [[https://github.com/kuehlingkuehling/RepRap-Industrial-Slic3r-profiles|GitHub repository]] for single and dual extruder prints.</wrap>\\
² <wrap lo>Installed on the right hot end at delivery and preset in the Slic3r profiles available at the [[https://github.com/kuehlingkuehling/RepRap-Industrial-Slic3r-profiles|GitHub repository]] for support material in dual extruder prints.</wrap>

=== Print ===
{{anchor:td-print:}}
|<75% 40% 60%>|
| Print volume                 | 200x185x280mm (10.4 liter)                                    |
| Extruder head                | dual extruder with two separate extruder nozzles for multi-colored and/or multi-material printing  |
| Print bed                    | exchangeable 210x210mm PEI/glass fabric/carbon composite sheet  | 
| Layer height                 | min. 0.1mm                                                        |
| Positioning accuracy         | ±0.1mm                                                            |
| Tolerance                    | ±0.2mm                                                            |

=== Material ===
{{anchor:td-material:}}
|<75% 40% 60%>|
| Printable materials      | ABS, PLA, HIPS, PVA, PC, PA12, PET                          |
| Filament diameter        | 2.85±0.1mm                                                 |
| Available filament qty.  | 0.75kg spool (200x55mm)\\ 2.30kg spool (296x100mm)  |

=== Power and Electronics ===
{{anchor:td-electronics:}}
|<75% 40% 60%>|
| Power consumption (total)  | approx. 800W  |
| Power supply unit             | 1000W with 12V(DC) connector panel, power plug and main switch 110 … 230V(AC), 13-6.5A, 50/60Hz  |
| Drives                        | 3x 1.2A stepper motor (XYZ positioning drives)\\ 2x 1.2A planetary gear drive stepper motor (extruder drives)  |
| Stand-alone operating module  | integrated capacitive 10” touchscreen controller  |
| Integrated computer           | BeagleBone Black   |
| Machine control               | RUMBA microprocessor board  |
| Load switching                | 5x 15A MOSFET board  |
| Fans                          | 3x 119x119x25mm, 12V, 140m³/h axial fan (heat chamber circulation and cooling system)\\ 1x 80x80x25, 12V, 33m³/h axial fan (air filter)  |
| Network                       | Ethernet 10/100, RJ45  |

=== Sensors ===
{{anchor:td-sensors:}}
|<75% 40% 60%>|
| Limit switch\\ H-frame (X/Y) and print table (Z)                   | magnetic hall endstops  |
| Filament end recognition                                           | mechanic limit switch  |
| Temperature sensors\\ extruder nozzle, print table, print chamber  | 300°C thermistors  |

=== Closed loop water cooling system ===
{{anchor:td-cooling:}}
|<75% 40% 60%>|
| Pump           | 12V(DC) circulation pump with integrated compensation reservoir  |
| Throughput     | approx. 210l/h  |
| Radiator       | 120mm full copper radiator  |
| Fan            | see [[#Electronics|electronics]]  |
| Hose diameter  | G1/4”  |
| Coolant        | Innovatek Protect IP ready-to-use  |
| Coolant qty.   | approx. 250ml  |


=== Air filter ===
{{anchor:td-air-filter:}}
|<75% 40% 60%>|
| Air filter  | fan duct with exchangeable activated charcoal container  |
| Fan         | see [[#Electronics|electronics]]  |
| Filling     | 10g, Ø4mm activated charcoal granules  |


=== Ambient conditions ===
{{anchor:td-ac:}}
|<75% 40% 60%>|
| Operating temperature  | +18°C ... +27°C  |
| Storage temperature    | +5°C ... +35°C   |
| Rel. air humidity      | max. 70%          |
| Setup site             | no excessive formation of dust (e.g. near woodworks, CNC machining centers)   |
User Tools

Site Tools

Page Tools
