Differences

This shows you the differences between two versions of the page.

--- vp75:description [2017/01/18 13:11]
Simon Kühling [Functional principle] wording
+++ vp75:description [2017/01/18 14:36]
Simon Kühling WIP
@@ Line 82: / Line 82: @@
 </WRAP>
+==== Build chamber ====
+<WRAP group>
+<WRAP half column>
+|<100% 5% 95%>|
+^ No.  ^ Description   ^
+|  1  | Print Bed Unit                                         |
+|  2  | Chamber Heater Unit                                    |
+|  3  | Axes Gantry                                            |
+|  4  | Print Head Unit                                        |
+|  5  | Linear Axis                                            |
+The build chamber is the main production area with the vertically moving [[#print-table-and-print-bed|print table]] and the two-directional horizontally moving extruder head inside.\\ All [[#Drives|electrical motors]] are installed at their working point and equipped with a water cooling system. The [[#Extruder head components|extruder head]] moves on an H-frame, tooth-belt-driven by two separate stepper motors in X- and Y-direction. The [[#Print table and print bed|print table]] is lifted and lowered in Z-direction by a spindle drive.\\
+For regulating the temperature inside the build chamber two heating resistors in separate housings heat the air which then is circulated through the chamber by the fans.\\
+Cables and hoses are installed in and guided by cable carriers.\\
+To minimize air pollution from dissolved substances, an additional fan circulates the air through a filter element filled with granules of activated carbon.\\
+The access to the build chamber is the magnetically closed double door at the front.
+</WRAP>
+<WRAP half column>
+[{{fehlendegrafik.png?400|Inside view of the build chamber.}}]
+</WRAP>
+</WRAP>
+<WRAP clear></WRAP>

User Tools

Site Tools

Differences

Page Tools