This is an old revision of the document!
Housing | Sheet metal bent parts White powder-coating Adjustable machine feet |
Door | Sheet metal frame with acrylic glass cover Magnetic closure Safety switch (optional) |
Additional features | integrated LED lighting |
Length | 800 mm |
Width | 600 mm |
Height | 800 mm |
Weight | 250 kg (empty) |
Positioning System | 3-axis delta Automatic three-point leveling |
Manufacturing Technology | Fused Filament Fabrication (FFF) |
Compressed Air | |
Connection cable | 1 m 230 V AC Schuko plug IEC 60320 16A connector |
Network | Ethernet 10/100, RJ45 |
Extrusion Temperature | max. +500°C |
Build Plate Temperature | max. +130°C |
Build Chamber Temperature | max. +70°C |
Screwable M6 brass nozzles A/F8 (included in delivery) | Bore diameter [mm] | Recommended layer height First layer / following |
2×0.25 | 0.25 / 0.10 - 0.20 | |
2×0.35 | 0.35 / 0.10 - 0.28 | |
1×0.50 | 0.50 / 0.20 - 0.40 | |
1×0.75 | 0.60 / 0.25 - 0.60 |
Build Volume | 75 liter Height: 400 mm Build plate diameter: 600 mm |
Extruder head | Encapsulated high-temperature single nozzle |
Build Plate | Exchangeable continuous-use PEI sheet (∅600 mm) with bajonett catch |
Filament diameter | 1.75±0.1mm |
Minimum layer resolution | 0.1mm |
Positioning accuracy | ±0.1mm |
Approx. Tolerance | ±0.2mm |
Power consumption (total) | approx. 800W |
Power supply unit | 1050W, 100 … 240V(AC) input with power plug and main switch 13-6.5A 50/60Hz 12V(DC) connector panel |
Drives | 3x 1.2A stepper motor (XYZ positioning drives) |
2x 1.2A planetary gear drive stepper motor (extruder drives) | |
Positioning step-width axes | X=0.028mm Y=0.019mm Z=0.003mm |
Hot ends | 12V, 40W integrated heating element per hot end |
Print bed heating | 170W wired silicone heating pad |
Chamber heating | 4x 170W heating resistor (two per heating element) |
Chamber lighting | 2x 4W LED array, 6.500K |
Stand-alone operating module | integrated capacitive 10” touchscreen controller |
Integrated computer | UDOO Quad Single Board Computer (Quad core 1GHz CPU) |
Machine control | RADDS v1.5 3D Printer Driver Shield |
Load switching | 3x High Current Solid State Relais |
Fans | 3x 119x119x25mm, 12V, 140m³/h axial fan (heat chamber circulation and cooling system) |
1x 80x80x25, 12V, 33m³/h axial fan (air filter) |
Limit switch H-frame (X/Y) and print table (Z) | magnetic hall endstops |
Filament end recognition | mechanic limit switch |
Temperature sensors hot ends | 800°C thermocouple |
Temperature sensors print table, print chamber | 300°C thermistors |
Throughput | 80 l/h |
Radiator | 120 mm full copper radiator |
Fan | see electronics |
Hose diameter | G1/4” |
Coolant | Innovatek Protect IP ready-to-use |
Coolant qty. | approx. 250ml |
Air filter | fan duct with exchangeable activated charcoal container |
Fan | see electronics |
Filling | 10g, Ø4mm activated charcoal granules |
Operating temperature | +18°C … +27°C |
Storage temperature | +5°C … +35°C |
Rel. air humidity | max. 70% |
Setup site | no excessive formation of dust (e.g. near woodworks, CNC machining centers) |