This is an old revision of the document!
Housing | Sheet metal bent parts White powder-coating Adjustable machine feet |
Door | Sheet metal frame with acrylic glass cover Magnetic closure Safety switch (optional) |
Additional features | integrated LED lighting |
Length | 800 mm |
Width | 800 mm |
Height | 2,200 mm |
Weight | 250 kg (empty) |
Positioning System | 3-axis delta Automatic three-point leveling |
Manufacturing Technology | Fused Filament Fabrication (FFF) |
Compressed Air | |
Connection cable | 1 m 230 V AC Schuko plug IEC 60320 16A connector |
Network | Ethernet 10/100, RJ45 |
Extrusion Temperature | max. +500°C |
Build Plate Temperature | max. +130°C |
Build Chamber Temperature | max. +70°C |
Build Volume | 75 liter Height: 400 mm Build plate diameter: 600 mm |
Extruder head | Encapsulated high-temperature single nozzle |
Build Plate | Exchangeable continuous-use PEI sheet (∅600 mm) with bajonett catch |
Filament diameter | 1.75±0.1mm |
Minimum layer resolution | 0.1mm |
Positioning accuracy | ±0.1mm |
Approx. Tolerance | ±0.2mm |
Power consumption (total) | approx. 1,000 W |
Power supply unit | 1050 W, 100 … 240 V(AC) input with power plug and main switch 16 A 50/60Hz 12V(DC) connector panel |
Drives | 3x 1.2 A stepper motor (XYZ positioning drives) |
2x 1.2A planetary gear drive stepper motor (extruder drives) | |
Positioning step-width axes | X=0.028 mm Y=0.019 mm Z=0.003 mm |
Hot end | 12 V, 40 W integrated heating element per hot end |
Build plate heating | 170 W wired silicone heating pad |
Chamber heating | 170 W heating resistor (two per heating element) |
Chamber lighting | 2x 4 W LED array, 6.500K |
Stand-alone operating module | integrated capacitive 10” touchscreen controller |
Integrated computer | UDOO Quad Single Board Computer (Quad core 1GHz CPU) |
Machine control | RADDS v1.5 3D Printer Driver Shield |
Load switching | 3x High Current Solid State Relais |
Heating Fan | 119x119x25 mm, 12 V, 140 m³/h axial fan |
80x80x25, 12 V, 33 m³/h axial fan (air filter) |
Limit switch axes vertical position | magnetic hall endstops |
Filament end recognition | mechanic limit switch |
Temperature sensors hot end | 800 °C thermocouple |
Temperature sensors build plate, build chamber | 300 °C thermistors |
Throughput | 80 l/h |
Radiator | 120 mm full copper radiator |
Fan | see electronics |
Air filter | fan duct with exchangeable activated charcoal container |
Fan | see electronics |
Filling | 10 g, Ø4 mm activated charcoal granules |
Operating temperature | +18°C … +27°C |
Storage temperature | +5°C … +35°C |
Rel. air humidity | max. 70% |
Setup site | no excessive formation of dust (e.g. near woodworks, CNC machining centers) |