Benutzer-Werkzeuge
de:http:manual.slic3r.org:simple-mode:simple-mode-filament-settings
Medien-Manager
Namensräume
Namensraum wählen
Dateiauswahl
Dateien in reprap-industrial-v1
- 2014-06-17_13.53.54.jpg
- 1936×2592
- 2014/06/17 12:08
- 1.6 MB
- 2014-06-17_13.54.11.jpg
- 1936×2592
- 2014/06/17 12:08
- 1.6 MB
- axes_movement_theory.png
- 2000×2003
- 2015/03/17 14:55
- 149 KB
- backlash_over-compensated.png
- 2000×2003
- 2015/03/18 14:25
- 146.5 KB
- backlash_uncompensated.png
- 2000×2003
- 2015/03/18 12:44
- 139.1 KB
- backlash_wrong_compensation.png
- 2000×1079
- 2015/03/17 13:39
- 123.5 KB
- beaglebone_black.jpg
- 3264×2448
- 2014/04/30 13:51
- 2.5 MB
- beaglebone_black_eject_card.jpg
- 3264×2448
- 2014/05/01 13:19
- 2 MB
- beaglebone_black_microsd_card.jpg
- 3264×2448
- 2014/04/30 13:51
- 2.1 MB
- calibrationcube_30x30x15.stl
- 2015/01/15 10:18
- 1.5 KB
- cat_merged.png
- 1460×743
- 2015/07/02 10:29
- 111.6 KB
- cat_split.png
- 1460×743
- 2015/07/02 10:29
- 224.8 KB
- collars-1.jpg
- 3264×2448
- 2014/05/01 22:22
- 2 MB
- collars-2.jpg
- 3264×2448
- 2014/05/01 22:22
- 1.9 MB
- collars-3.jpg
- 2448×3264
- 2014/05/01 22:24
- 1.8 MB
- comm_overview_1.png
- 998×803
- 2014/06/27 12:39
- 924.4 KB
- cubic_pyramid_mean-values.jpg
- 595×888
- 2015/03/18 12:38
- 70.8 KB
- cubic_pyramid_mean-values.png
- 595×888
- 2015/03/18 12:38
- 56 KB
- cylindric_pyramid_mean-values.jpg
- 595×888
- 2015/03/18 12:38
- 70.6 KB
- cylindric_pyramid_mean-values.png
- 595×888
- 2015/03/18 12:38
- 55.3 KB
- cylpyrcompuncomp.png
- 2000×1079
- 2015/03/13 14:12
- 148.5 KB
- desc_bc_overview_1.png
- 998×1168
- 2015/09/14 09:06
- 1.1 MB
- desc_buildchamber_backview.png
- 1000×857
- 2014/06/27 11:58
- 895.1 KB
- desc_buildchamber_insideview.png
- 997×1179
- 2014/06/27 11:58
- 1.1 MB
- desc_drives.png
- 997×748
- 2014/08/27 11:06
- 1023.7 KB
- desc_drives_2.png
- 1000×754
- 2014/10/10 06:40
- 1019.7 KB
- desc_extruderhead.png
- 1000×1139
- 2014/12/05 14:29
- 828.4 KB
- desc_extruderheadcomponents_ht500.png
- 1997×2090
- 2016/01/27 13:19
- 4.2 MB
- desc_extrudernozzledis.png
- 1000×1197
- 2014/11/19 15:39
- 859.9 KB
- desc_filamentfeedunit.png
- 1000×926
- 2014/06/27 11:58
- 778.7 KB
- desc_filamentfeedunit_dustsponge.png
- 1000×845
- 2014/08/27 11:44
- 562.2 KB
- desc_moving_axes.png
- 998×1012
- 2015/09/14 10:55
- 1.2 MB
- desc_moving_drives.png
- 998×1082
- 2015/09/14 09:02
- 1.3 MB
- desc_nozzletipsann.png
- 1000×271
- 2014/07/09 10:05
- 116.6 KB
- desc_overviewelectronicchamberfront.png
- 1000×797
- 2014/10/10 07:16
- 728.5 KB
- desc_overviewelectronicchamberhind.png
- 1994×813
- 2014/10/08 12:28
- 1 MB
- desc_overviewelectronicchamberhind_typeplate.png
- 996×1273
- 2014/10/10 07:10
- 1.1 MB
- desc_overviewelectronicchamberleft.png
- 1000×828
- 2014/09/03 14:47
- 907.6 KB
- desc_overviewelectronicchamberright.png
- 1000×698
- 2015/07/01 12:12
- 664.5 KB
- desc_points_of_view.png
- 998×1147
- 2015/09/14 10:13
- 1016.4 KB
- desc_powercable.png
- 1000×514
- 2014/10/08 12:56
- 160.4 KB
- desc_printbed_100_overview.png
- 1000×913
- 2014/10/09 10:22
- 680.3 KB
- desc_printbed_110_levelingscrews.png
- 1000×860
- 2014/10/09 10:22
- 876.6 KB
- desc_printbed_110_printbedclamps.png
- 1000×807
- 2014/10/09 10:22
- 852.6 KB
- desc_printtable.png
- 998×854
- 2014/06/27 12:39
- 678.6 KB
- desc_screen_printingstat.png
- 999×280
- 2014/07/23 12:17
- 135.7 KB
- desc_screenfinishednomode.png
- 998×524
- 2014/07/23 12:26
- 145.8 KB
- desc_screenlogmain.png
- 998×602
- 2014/07/01 14:05
- 181.3 KB
- desc_screenmanualmain.png
- 998×666
- 2014/07/02 07:56
- 176.9 KB
- desc_screenquery_readytoprint.png
- 998×583
- 2014/07/02 07:32
- 146.1 KB
- desc_screenqueuemain.png
- 998×514
- 2014/07/01 14:32
- 149.7 KB
- desc_screensetupmain.png
- 998×542
- 2014/07/01 13:49
- 156.9 KB
- desc_tempdistribnozzle.png
- 999×650
- 2014/06/25 07:53
- 337.7 KB
- desc_tempdistribnozzle_de.png
- 997×679
- 2015/08/12 08:49
- 338.7 KB
- desc_thermistors_printbed_chamber.png
- 1000×752
- 2014/10/10 06:44
- 586.1 KB
- desc_wiper.png
- 1999×1167
- 2015/07/01 13:40
- 2.4 MB
- desc_x-sensor.png
- 1000×1035
- 2014/10/09 08:58
- 1.3 MB
- desc_y-sensor.png
- 1000×1149
- 2014/10/09 09:01
- 1.3 MB
- desc_z-sensor.png
- 1000×1297
- 2014/10/09 09:05
- 1.3 MB
- diameterdeviationextrusion2.png
- 912×405
- 2015/03/18 13:12
- 60.5 KB
- dsc_1796.jpg
- 4288×2848
- 2014/06/23 09:46
- 3.9 MB
- dual_extrusion_multicolor.png
- 2000×1346
- 2015/03/27 16:02
- 3.4 MB
- ec-declaration-of-conformity.pdf
- 2014/07/09 10:33
- 21.9 KB
- ex_slic3r_dual_assignparts_1.png
- 3993×2391
- 2015/07/02 09:12
- 431.8 KB
- ex_slic3r_dual_assignparts_2.png
- 1997×1565
- 2015/07/02 09:12
- 253.9 KB
- ex_slic3r_dual_assignparts_3.png
- 2303×1339
- 2015/07/02 09:13
- 343.6 KB
- fff_principle.png
- 994×766
- 2014/11/11 14:57
- 101.4 KB
- filametmeasurediam_1.png
- 1000×678
- 2015/01/22 14:24
- 899.4 KB
- filametmeasurediam_2.png
- 1000×678
- 2015/01/22 14:24
- 918 KB
- filametmeasurediam_3.png
- 1000×678
- 2015/01/22 14:24
- 846.5 KB
- filametmeasurekinks_1.png
- 1000×678
- 2015/01/22 14:03
- 783.6 KB
- filametmeasureround_1.png
- 1000×678
- 2015/01/22 14:03
- 860.6 KB
- filametmeasureround_2.png
- 1000×678
- 2015/01/22 14:03
- 780.3 KB
- gageclip_lowerhalf_final.stl
- 2015/01/15 11:39
- 259.6 KB
- gageclip_upperhalf_final.stl
- 2015/01/15 11:39
- 92 KB
- gui_bedchamberprofileselect_v110.png
- 998×665
- 2014/09/29 12:58
- 198.8 KB
- gui_configmenu_1_v110.png
- 3660×2351
- 2016/01/06 09:55
- 638.5 KB
- gui_configmenu_2_v110.png
- 3660×2351
- 2016/01/06 09:57
- 610.2 KB
- gui_configmenu_3_v110.png
- 3660×866
- 2016/01/06 10:04
- 101.2 KB
- gui_configmenu_v110.png
- 998×665
- 2014/09/29 12:55
- 208.5 KB
- gui_confirmpj_v110.png
- 3660×1392
- 2016/01/06 09:14
- 122.3 KB
- gui_currentlyprinting_v110.png
- 999×325
- 2014/09/30 10:01
- 131.8 KB
- gui_expertmenu_1_v110.png
- 998×619
- 2014/09/30 14:11
- 176 KB
- gui_expertmenu_2_v110.png
- 998×619
- 2014/09/30 14:11
- 35.2 KB
- gui_finishedprinting_v110.png
- 3660×1351
- 2016/01/06 13:40
- 103.9 KB
- gui_footercut_v110.png
- 998×195
- 2014/12/03 14:35
- 23.7 KB
- gui_logmenu_v110.png
- 998×619
- 2014/10/01 05:54
- 206.6 KB
- gui_materialselect_v105.png
- 998×665
- 2014/09/29 12:26
- 210.2 KB
- gui_materialselect_v110.png
- 998×665
- 2014/09/29 12:57
- 195.2 KB
- gui_menues_v110.png
- 1000×166
- 2014/09/30 09:07
- 49 KB
- gui_poweroff-button_v110.png
- 3660×866
- 2016/01/06 10:07
- 25.2 KB
- gui_primext_1_v110.png
- 999×295
- 2014/10/01 06:40
- 140.3 KB
- gui_primextr_v105.png
- 998×665
- 2014/09/29 12:21
- 322.6 KB
- gui_primextr_v110.png
- 998×665
- 2014/09/29 13:00
- 354.1 KB
- gui_printmenu_v110_footer.png
- 4000×1194
- 2015/12/14 13:21
- 134 KB
- gui_printmenu_v110_header.png
- 4000×1286
- 2015/12/14 11:33
- 460.6 KB
- gui_printmenu_v110_ov.png
- 4000×2523
- 2015/12/14 11:26
- 614.8 KB
- gui_printmenu_v110_queue.png
- 4000×1537
- 2015/12/14 12:16
- 194.6 KB
- gui_printtab_v110.png
- 998×665
- 2014/09/29 11:18
- 205 KB
- gui_printtabnumber_v110.png
- 998×665
- 2014/09/29 15:02
- 174.7 KB
- gui_setup_main_calibforde.png
- 1997×1223
- 2015/06/17 13:28
- 510.7 KB
- gui_setupmenu_v105.png
- 998×665
- 2014/09/29 12:26
- 192.9 KB
- gui_setupmenu_v110.png
- 4000×2928
- 2015/12/14 09:33
- 757.2 KB
- gui_setupmenu_v110_extrusionmultiplier.png
- 998×636
- 2014/12/03 13:48
- 329.2 KB
- gui_setupmenu_v110_p2.png
- 4000×2280
- 2015/12/14 10:02
- 719.8 KB
- gui_setupmenu_v110_rrorversion.png
- 998×599
- 2014/10/08 08:33
- 174.8 KB
- gui_v110_emergencystop.png
- 1333×505
- 2015/05/21 08:13
- 41.7 KB
- gui_v110_emergencystoptriggered.png
- 2997×409
- 2015/05/21 08:42
- 236.2 KB
- gui_v110_pauseprint_1.png
- 1997×269
- 2015/03/25 14:03
- 187.3 KB
- gui_v110_pauseprint_2.png
- 1997×269
- 2015/03/25 14:03
- 179.2 KB
- gui_v110_setup_selectcalibextr.png
- 999×633
- 2014/12/18 07:44
- 217.9 KB
- gui_v110_setupmain_v2.png
- 1999×628
- 2015/04/14 12:45
- 46.3 KB
- header_dual_extrusion.png
- 4000×2690
- 2015/03/27 08:46
- 10.7 MB
- header_dual_extrusion_leveling.png
- 2000×961
- 2015/03/27 10:32
- 2 MB
- ht400_anschliessen_de_201509.pdf
- 2015/10/05 13:04
- 629.3 KB
- img_1708.jpg
- 5472×3648
- 2015/04/23 10:45
- 6 MB
- initcomm_addprintjob.png
- 998×665
- 2014/09/29 10:21
- 110.3 KB
- kk-backend-setup_addpreset_1.png
- 1000×1134
- 2014/08/27 09:22
- 259.7 KB
- kk-backend-setup_addpreset_2.png
- 1000×464
- 2014/08/27 09:23
- 31 KB
- kk-backend-setup_addpreset_3.png
- 1993×1337
- 2014/08/26 12:48
- 836.4 KB
- knba_flexfilatrouble.png
- 4000×1699
- 2015/05/07 12:39
- 5 MB
- knba_installflexfilaadapater.png
- 4000×2605
- 2015/05/07 12:36
- 7.8 MB
- leveling_nok.mp4
- 2014/08/22 14:02
- 2.3 MB
- leveling_ok.mp4
- 2014/08/22 14:01
- 1.5 MB
- levelingpaperspacer.png
- 988×1389
- 2014/08/22 14:01
- 1.7 MB
- lopsidedleveling.png
- 1988×1874
- 2015/10/06 07:06
- 2.3 MB
- lopsidedleveling_de.png
- 1988×1874
- 2015/10/06 07:07
- 2.3 MB
- mtc_airfilter.png
- 995×2024
- 2014/07/07 09:01
- 997.9 KB
- mtc_airfilteropenlid.png
- 3999×2542
- 2014/07/08 08:39
- 2 MB
- mtc_aligningbarrel.png
- 993×1831
- 2014/09/08 13:14
- 1.7 MB
- mtc_aligningbarrelhigh.png
- 993×1831
- 2014/09/08 13:03
- 1.4 MB
- mtc_aligningbarrellow.png
- 993×1831
- 2014/09/08 13:03
- 1.4 MB
- mtc_belttension.png
- 998×666
- 2014/07/03 08:43
- 375.9 KB
- mtc_cleangeardrive.png
- 998×666
- 2014/07/03 08:35
- 474.8 KB
- mtc_coolingwaterpump_1.png
- 1000×616
- 2014/07/07 09:11
- 751.1 KB
- mtc_coolingwaterpumpopenlid.png
- 996×827
- 2014/07/04 11:27
- 399.4 KB
- mtc_coolingwaterpumprefill.png
- 996×827
- 2014/07/07 09:26
- 630.4 KB
- mtc_echamberbackview.png
- 996×827
- 2014/07/04 11:35
- 717.6 KB
- mtc_echambersideview.jpg.png
- 999×436
- 2014/07/03 13:31
- 300.2 KB
- mtc_echambersideview.png
- 998×552
- 2014/07/11 08:25
- 409.4 KB
- mtc_filamentinletmeasures.png
- 999×803
- 2014/08/27 05:46
- 838.2 KB
- mtc_filamentload_1.png
- 1000×925
- 2014/07/10 09:16
- 656.1 KB
- mtc_filamentload_2.png
- 1000×925
- 2014/07/10 09:19
- 636.2 KB
- mtc_filamentload_3.png
- 1000×925
- 2014/07/10 09:23
- 619.4 KB
- mtc_filamentmovespools.png
- 1000×1012
- 2015/11/09 08:39
- 1.1 MB
- mtc_filamentrotation.png
- 1000×925
- 2014/07/10 09:30
- 1.3 MB
- mtc_filamentunload_1.png
- 1000×925
- 2014/07/10 08:57
- 624.6 KB
- mtc_filamentunload_2.png
- 1000×925
- 2014/07/10 09:10
- 497.5 KB
- mtc_filamentunload_3.png
- 1000×925
- 2014/07/10 09:10
- 650.6 KB
- mtc_heatercablewarning.png
- 1000×684
- 2014/08/27 08:17
- 856.9 KB
- mtc_idlerleverpreset.png
- 1055×812
- 2014/09/12 11:08
- 665.4 KB
- mtc_liftelevatorcorrect.png
- 1000×679
- 2014/12/05 12:01
- 979.4 KB
- mtc_liftelevatorincorrect.png
- 1000×679
- 2014/12/05 12:01
- 840.1 KB
- mtc_liftelevatorwatchpulley.png
- 999×1337
- 2014/12/05 13:00
- 1.7 MB
- mtc_loosennozzletip.png
- 998×666
- 2014/07/03 10:41
- 519.3 KB
- mtc_loosensetscrewheater.png
- 1000×710
- 2014/08/27 07:31
- 888.2 KB
- mtc_loosensetscrewheater_2.png
- 993×664
- 2014/11/03 10:40
- 910.5 KB
- mtc_loosensetscrews.png
- 1000×710
- 2014/08/27 07:04
- 905.7 KB
- mtc_loosingheatingblocksetscrew.png
- 1000×705
- 2014/07/29 13:31
- 900.3 KB
- mtc_o_echambersideview_1.jpg.png
- 1000×632
- 2014/08/27 13:01
- 563 KB
- mtc_pullbarrelout.png
- 1000×757
- 2014/08/27 07:39
- 930.5 KB
- mtc_pullheateroff.png
- 2000×2095
- 2015/11/20 09:47
- 4.8 MB
- mtc_pushbarrelup.png
- 1000×710
- 2014/08/27 06:55
- 912.1 KB
- mtc_removesdcard-bb.png
- 1000×756
- 2014/08/19 12:24
- 949.5 KB
- mtc_sdcard-bb.png
- 1000×756
- 2014/08/19 12:06
- 954 KB
- mtc_springload.png
- 998×666
- 2014/07/03 08:40
- 558.7 KB
- mtc_z-axis_alignclampcollar.png
- 1000×857
- 2014/12/05 13:10
- 777 KB
- mtc_z-axis_loosensetscrew.png
- 1000×837
- 2014/12/05 12:01
- 712 KB
- mtc_z-axis_pushclampcollarup.png
- 1000×675
- 2014/12/05 12:01
- 893.6 KB
- mtc_z-axis_pushclampcollarup_de.png
- 2000×1373
- 2015/12/03 08:46
- 2.9 MB
- netfab_brokenpart-analysis.png
- 2000×2296
- 2015/05/27 13:15
- 527.4 KB
- op_initcommfirststepswebif.png
- 1264×1041
- 2014/07/15 09:37
- 215 KB
- op_initcommqueueprinter.png
- 1280×800
- 2014/07/15 09:37
- 265.1 KB
- op_initcommqueuewebif.png
- 1280×800
- 2014/07/15 09:37
- 148.8 KB
- open_electronics_enclosure_-_step1_-_01.png
- 612×816
- 2014/04/30 12:54
- 845.2 KB
- open_electronics_enclosure_-_step1_-_02.png
- 613×817
- 2014/04/30 12:54
- 739 KB
- open_electronics_enclosure_-_step1_-_03.png
- 611×815
- 2014/04/30 12:54
- 744.5 KB
- open_electronics_enclosure_-_step1_-_04.png
- 1278×864
- 2014/04/30 12:54
- 1.3 MB
- open_electronics_enclosure_-_step2-_01.png
- 1193×1338
- 2014/04/30 12:54
- 1.8 MB
- open_electronics_enclosure_-_step3_-_01.png
- 1193×894
- 2014/04/30 12:54
- 1.2 MB
- open_electronics_enclosure_-_step4_-_01.png
- 983×700
- 2014/04/30 12:54
- 837.5 KB
- open_electronics_enclosure_-_step4_-_02.png
- 933×700
- 2014/04/30 12:54
- 910.5 KB
- open_electronics_enclosure_-_step4_-_03.png
- 935×701
- 2014/04/30 12:54
- 885.3 KB
- open_electronics_enclosure_-_step4_-_04.png
- 935×701
- 2014/04/30 12:54
- 889.6 KB
- open_electronics_enclosure_-_step5_-_01.png
- 917×688
- 2014/04/30 12:54
- 846.2 KB
- open_electronics_enclosure_-_step5_-_02.png
- 924×693
- 2014/04/30 12:54
- 703.4 KB
- open_electronics_enclosure_-_step5_-_03.png
- 918×689
- 2014/04/30 12:54
- 691.2 KB
- open_electronics_enclosure_-_step5_-_04.png
- 923×692
- 2014/04/30 12:54
- 994.4 KB
- opm_adjustingspools.png
- 2000×1034
- 2015/11/09 08:47
- 1 MB
- opm_powerbutton.png
- 2000×1672
- 2015/05/19 13:46
- 3.3 MB
- opm_pulleyscadandsliced.png
- 2973×2416
- 2015/05/20 09:28
- 1.1 MB
- opm_wakebutton.png
- 2000×1595
- 2015/05/19 13:46
- 2.1 MB
- packstep0.png
- 3219×3026
- 2015/05/29 12:52
- 8.2 MB
- packstep1.png
- 3202×3304
- 2015/05/13 14:21
- 11.5 MB
- packstep3.png
- 868×962
- 2015/05/13 14:04
- 218.7 KB
- packstep4.png
- 3202×2895
- 2015/05/13 14:21
- 10 MB
- packstep5.png
- 3202×2895
- 2015/05/13 14:21
- 10.3 MB
- packstep6.png
- 3200×4841
- 2015/07/24 13:18
- 11.7 MB
- packstep7.png
- 3200×4012
- 2015/07/24 13:18
- 10.6 MB
- packstep8.png
- 3202×2195
- 2015/05/13 14:20
- 7.5 MB
- print_table_overview.png
- 1997×1731
- 2016/01/28 10:32
- 2.9 MB
- print_table_overview_2.png
- 1997×1438
- 2016/01/28 10:32
- 2.2 MB
- pyrcompuncomp.png
- 2000×2098
- 2015/03/17 09:43
- 242.2 KB
- qsg_adjustingspools.png
- 3334×1651
- 2015/04/29 07:41
- 2.4 MB
- qsg_config_selectprofiles.png
- 4268×3292
- 2015/04/28 15:09
- 323.9 KB
- qsg_e-head_overview.png
- 4010×2900
- 2015/04/28 13:39
- 2.1 MB
- qsg_emergencybutton.png
- 4268×1237
- 2015/04/29 08:36
- 42.5 KB
- qsg_emptyprintscreen.png
- 2999×1903
- 2015/05/15 10:35
- 293.4 KB
- qsg_hotend_overview.png
- 4010×2900
- 2015/04/28 14:13
- 2 MB
- qsg_mainoverview.png
- 4269×2595
- 2015/04/21 10:26
- 632.4 KB
- qsg_overview_1.png
- 3997×4036
- 2015/05/18 11:50
- 5 MB
- qsg_overview_2.png
- 3997×4036
- 2015/05/18 12:13
- 4.6 MB
- qsg_overview_3.png
- 3997×4036
- 2015/05/18 12:13
- 6.3 MB
- qsg_overview_4.png
- 3997×4036
- 2015/05/18 13:29
- 5.8 MB
- qsg_overview_frontside.png
- 4010×2900
- 2015/04/28 13:27
- 4.6 MB
- qsg_overview_rearside.png
- 4010×2900
- 2015/04/28 13:27
- 6.3 MB
- qsg_poweroffbutton.png
- 4268×1237
- 2015/04/29 08:36
- 35.3 KB
- qsg_print_calibrateextrprintjob.png
- 4268×945
- 2015/04/29 11:20
- 159.2 KB
- qsg_printheader.png
- 4268×1048
- 2015/04/28 14:33
- 208.3 KB
- qsg_setup_selectcalibrateextr.png
- 4268×644
- 2015/04/29 11:11
- 38.5 KB
- qsg_setup_selectextr.png
- 4268×644
- 2015/04/29 11:15
- 38.5 KB
- qsg_setupoverview.png
- 4268×2594
- 2015/04/21 12:09
- 731.9 KB
- qsg_setupurl.png
- 4268×2406
- 2015/04/29 07:12
- 172.6 KB
- qsg_setupurl_fullscreen.png
- 2999×1903
- 2015/05/15 10:47
- 407.6 KB
- qsg_setupwizards.png
- 4268×3292
- 2015/04/28 15:14
- 178.3 KB
- qsg_setupwizards2.png
- 4268×1382
- 2015/04/29 11:04
- 77 KB
- qsg_wif-url.png
- 4268×2406
- 2015/04/29 07:12
- 174.4 KB
- qsg_wif_firststeps.png
- 2999×1903
- 2015/05/15 11:01
- 206.4 KB
- qsg_workspace.png
- 2004×2094
- 2015/05/15 08:51
- 243.4 KB
- reprap-industrial_sd-image_hardware-revision-1.0.0_2015-02-06.img.tar.gz
- 2015/02/09 16:11
- 1.2 GB
- reprap-industrial_sd-image_hardware-revision-1.0.0_2015-03-23.img.tar.gz
- 2015/04/02 15:15
- 1.3 GB
- reprap-industrial_sd-image_hardware-revision-1.1.0_2015-02-06.img.tar.gz
- 2015/02/09 16:50
- 1.2 GB
- reprap-industrial_sd-image_hardware-revision-1.1.0_2015-03-23.img.tar.gz
- 2015/04/02 14:13
- 1.3 GB
- reprap-industrial_sd-image_hardware-revision-1.2.0_2015-03-23.img.tar.gz
- 2015/04/02 14:34
- 1.2 GB
- rumba-board.jpg
- 3264×2448
- 2014/05/01 14:04
- 2.7 MB
- rumba-fan.jpg
- 3264×2448
- 2014/05/01 14:04
- 1.9 MB
- rumba-microstepping-jumpers.png
- 1000×447
- 2014/05/01 14:42
- 690.1 KB
- rumba-old-new.png
- 732×477
- 2014/05/01 15:09
- 588 KB
- rumba-remove-stepper-driver.jpg
- 3264×2448
- 2014/05/01 14:25
- 2.6 MB
- rumba.jpg
- 3264×2448
- 2014/05/01 14:07
- 2 MB
- rumba_usb-to-serial_reflash.tar.gz
- 2014/09/03 11:10
- 35 KB
- secure_boxed.png
- 1200×452
- 2014/12/16 11:07
- 1 MB
- secure_doors.png
- 1600×602
- 2014/12/16 11:07
- 1.2 MB
- secure_doors_gui.png
- 3202×3472
- 2015/04/24 07:08
- 12 MB
- secure_echain.png
- 3202×2157
- 2015/04/23 11:18
- 6.6 MB
- secure_extruderhead.png
- 3203×2159
- 2015/04/23 11:15
- 6.9 MB
- secure_gui.png
- 3202×2157
- 2015/04/23 11:11
- 8 MB
- secure_hbridge_front.png
- 3202×2157
- 2015/04/23 11:26
- 3.4 MB
- secure_hbridge_rear.png
- 3202×2157
- 2015/04/23 11:26
- 7.2 MB
- secure_headchain.png
- 1600×602
- 2014/12/16 11:07
- 1.2 MB
- secure_printtable.png
- 3202×2157
- 2015/04/23 11:30
- 6.1 MB
- secure_table.png
- 1598×594
- 2014/12/16 11:07
- 586.7 KB
- secure_yaxis.png
- 1600×923
- 2014/12/16 11:07
- 1.5 MB
- sg_cableconnections_heatingblockcableleadthrough.png
- 3062×2088
- 2015/05/12 14:28
- 6.4 MB
- sg_cableconnections_heatingblockdisconnect.png
- 3062×2088
- 2015/05/12 14:20
- 6.2 MB
- sg_cableconnections_heatingblockfind.png
- 3062×2088
- 2015/05/12 14:18
- 6.1 MB
- sg_cableconnections_heatingblockpullout.png
- 3062×2088
- 2015/05/12 14:24
- 6.1 MB
- sg_loosennoozletip_marked.png
- 1000×762
- 2014/08/27 07:55
- 646.6 KB
- sg_openechamber_1.png
- 998×695
- 2014/11/17 15:06
- 917 KB
- sg_setupmenu_information.png
- 1997×1102
- 2015/03/13 11:12
- 117.8 KB
- sg_typeplate_information.png
- 1999×1262
- 2015/03/13 10:48
- 249.2 KB
- sg_wipermount_1.png
- 1999×619
- 2015/07/23 14:35
- 1.1 MB
- sg_wipermount_2.png
- 1999×848
- 2015/07/23 14:39
- 1 MB
- sg_wipermount_3.png
- 1999×962
- 2015/07/23 14:41
- 1.5 MB
- sg_wipermount_4.png
- 1999×1252
- 2015/07/24 08:07
- 2.4 MB
- sg_wipermount_5.png
- 1999×1191
- 2015/07/24 10:03
- 2.4 MB
- sg_wipermount_6_.png
- 2000×1192
- 2015/07/24 09:13
- 2.4 MB
- slic3r_adding_raft_layers.png
- 1997×1366
- 2015/10/06 08:34
- 200 KB
- slic3r_advanced_extrusion-width.png
- 912×595
- 2015/03/18 14:58
- 83.8 KB
- slic3r_advancedsettings.png
- 1205×627
- 2014/08/23 10:28
- 74.7 KB
- slic3r_bicolor_1.png
- 1998×2278
- 2015/07/03 11:31
- 89.3 KB
- slic3r_bicolor_2.png
- 1997×4126
- 2015/06/23 12:54
- 817.8 KB
- slic3r_bicolor_11.png
- 1997×1293
- 2015/07/02 09:21
- 258.3 KB
- slic3r_bicolor_12.png
- 1997×1199
- 2015/07/02 09:21
- 174.4 KB
- slic3r_bicolor_13.png
- 1997×1170
- 2015/07/02 09:22
- 176.3 KB
- slic3r_bicolor_15.png
- 1997×1196
- 2015/06/30 10:03
- 243.1 KB
- slic3r_bicolor_new2.png
- 1997×965
- 2015/07/03 11:59
- 141 KB
- slic3r_bicolored_cat1.png
- 1997×1170
- 2015/07/03 09:57
- 263.6 KB
- slic3r_bicolored_cat2.png
- 1997×1170
- 2015/07/03 09:57
- 226.5 KB
- slic3r_bicolored_cat3.png
- 1997×1170
- 2015/07/03 09:57
- 218.2 KB
- slic3r_bicolored_cat4.png
- 1997×1170
- 2015/07/03 09:57
- 285.3 KB
- slic3r_bicolored_cat5.png
- 1997×1529
- 2015/07/03 10:40
- 278.7 KB
- slic3r_brim.png
- 1205×627
- 2014/08/23 10:28
- 47.7 KB
- slic3r_brokenpart-analysis.png
- 2000×925
- 2015/05/27 13:05
- 80.8 KB
- slic3r_dualex_plater.png
- 3995×2524
- 2015/03/23 14:42
- 246.2 KB
- slic3r_endgcode.png
- 999×584
- 2014/11/05 15:54
- 72.4 KB
- slic3r_firstlayersettings.png
- 1205×627
- 2014/08/23 10:27
- 73.7 KB
- slic3r_firstlayerspeed.png
- 1205×627
- 2014/08/23 10:28
- 82 KB
- slic3r_firstlayertemp.png
- 1205×627
- 2014/08/23 10:28
- 36.7 KB
- slic3r_minimumres.png
- 999×785
- 2014/06/27 14:25
- 85.3 KB
- slic3r_multipleextr_12.png
- 1997×1136
- 2015/07/03 12:14
- 161.4 KB
- slic3r_multipleextr_e1e2.png
- 1997×1136
- 2015/07/03 12:15
- 175 KB
- slic3r_platercalibcube_calibrateextrusion.png
- 1000×448
- 2014/12/19 11:42
- 72.5 KB
- slic3r_printer_toolchangegcode.png
- 1997×1196
- 2015/07/01 11:29
- 143.8 KB
- slic3r_printsettings_supportmaterial_z0.png
- 1997×965
- 2015/07/03 12:14
- 184.9 KB
- slic3r_raft.png
- 1205×627
- 2014/08/23 10:29
- 67.2 KB
- slic3r_selectconigbundle.png
- 1997×1175
- 2015/05/20 08:44
- 383.9 KB
- slic3r_selectpartsettings.png
- 999×1352
- 2014/12/17 15:46
- 285.4 KB
- slic3r_selectpartsettings_2.png
- 999×447
- 2014/12/19 11:42
- 73.8 KB
- slic3r_selectpartsettings_3.png
- 1000×758
- 2014/12/17 15:54
- 98 KB
- slic3r_selectprintsettings_calibrateextrusion.png
- 999×577
- 2014/12/19 12:17
- 88.6 KB
- slic3r_selectprintsettings_calibrateextrusion_advanced.png
- 1000×416
- 2015/01/16 11:33
- 72 KB
- slic3r_selectprintsettingsinfill_calibrateextrusion.png
- 999×571
- 2014/12/19 11:42
- 90.7 KB
- slic3r_start_plater_select.png
- 7328×9024
- 2016/01/06 13:29
- 827 KB
- slic3r_upscale.png
- 997×1142
- 2015/03/12 13:51
- 194.8 KB
- small_diameter_deviation_extrusion1.png
- 912×405
- 2015/03/18 14:44
- 52.3 KB
- t-t_slic3rv120_settingsbedshape.png
- 1000×1648
- 2014/08/22 14:01
- 238.2 KB
- tapeplate.png
- 1000×724
- 2014/10/08 12:03
- 112.5 KB
- tools_spoolwings.jpg
- 2448×3264
- 2015/07/20 10:20
- 1.7 MB
- touchscreen.png
- 4288×2848
- 2014/06/25 09:31
- 2.9 MB
- ts_backlash.png
- 1000×1668
- 2014/11/03 13:28
- 1.8 MB
- ts_backlash_installgage.png
- 1001×686
- 2014/11/03 10:13
- 985.5 KB
- ts_backlash_movehead_1.png
- 1001×1174
- 2014/11/03 12:33
- 973.2 KB
- ts_backlash_movehead_2.png
- 1000×1207
- 2014/11/03 12:36
- 969.6 KB
- ts_backlash_movehead_3.png
- 1000×1264
- 2014/11/03 13:16
- 958.6 KB
- ts_usb-to-serial_leds.png
- 1000×796
- 2014/09/03 11:14
- 865.7 KB
- ts_usb-to-serial_pins.png
- 998×676
- 2014/10/28 15:58
- 1 MB
- tt_calibrateextrusion_cubeprepost.png
- 999×433
- 2014/12/19 12:03
- 153.4 KB
- tt_extrusiondirection.png
- 1000×1216
- 2014/09/05 09:59
- 115.4 KB
- tt_extrusiondirection_1.png
- 1000×692
- 2014/09/05 09:59
- 125.3 KB
- tt_extrusiondirection_2.png
- 1000×692
- 2014/09/05 10:16
- 120.1 KB
- tt_extrusiondirection_3.png
- 996×689
- 2014/12/02 08:59
- 138.7 KB
- tt_extrusionmultiplier.png
- 999×466
- 2014/12/03 13:58
- 51 KB
- tt_gui-loggcodekeys.png
- 2999×1649
- 2015/05/07 14:15
- 73.9 KB
- tt_oozeprevention.png
- 1000×678
- 2014/09/10 10:44
- 71.2 KB
- tt_slic3r120_narrowmenus.png
- 997×576
- 2014/10/30 11:41
- 97.4 KB
- tt_slic3r120_narrowmenus_1.png
- 997×415
- 2014/10/30 12:09
- 78.9 KB
- tt_slic3r120_narrowmenus_2.png
- 997×415
- 2014/10/30 12:09
- 78.7 KB
- tt_slic3r120_narrowmenus_3.png
- 997×415
- 2014/10/30 12:09
- 72.3 KB
- tt_slic3r120_narrowmenus_4.png
- 997×415
- 2014/10/30 12:09
- 62 KB
- tt_slic3r_modify_endgcode_autooff.png
- 1997×1951
- 2015/09/17 08:44
- 284.8 KB
- tt_slic3r_modify_startendgcode.png
- 1997×1633
- 2015/09/17 08:17
- 260.3 KB
- tt_slic3rskirtbrim.png
- 1000×598
- 2014/09/10 10:44
- 58 KB
- typeplate_122015.png
- 592×312
- 2015/12/07 12:19
- 43.9 KB
- warping.jpg
- 5472×3648
- 2015/05/08 07:12
- 2.8 MB
- wi_firststeps_printstarted.png
- 3660×1950
- 2016/01/06 10:44
- 389.5 KB
- wi_firststeps_v110.png
- 998×665
- 2014/09/29 10:28
- 113.6 KB
- wi_log_1.png
- 3660×2330
- 2016/01/06 13:08
- 645.7 KB
- wi_queue_1.png
- 3660×1950
- 2016/01/06 10:51
- 352.8 KB
- wi_queue_2.png
- 3660×2486
- 2016/01/06 12:22
- 379.6 KB
- wi_queue_3.png
- 3660×724
- 2016/01/06 11:30
- 41.4 KB
- wi_setup_1.png
- 3660×2462
- 2016/01/06 11:59
- 391.6 KB
- wi_setup_11.png
- 3660×674
- 2016/01/06 12:39
- 94.7 KB
- wi_setup_12.png
- 3660×778
- 2016/01/06 12:39
- 129.5 KB
- wi_setup_13.png
- 3660×590
- 2016/01/06 12:39
- 124.3 KB
- wi_v105-v110_logdownload.png
- 997×1373
- 2015/11/18 11:52
- 299.2 KB
- wi_v110_setup_eprom_baklashsettings.png
- 999×1070
- 2014/10/22 11:42
- 140.4 KB
- wi_v110_setup_eprom_editbacklashsettings.png
- 1002×196
- 2014/10/22 11:42
- 16.9 KB
- wif_setup_addfilamentprofile.png
- 3660×2745
- 2016/01/06 12:14
- 392.4 KB
- wif_setup_addpreheatingprofile.png
- 3660×3672
- 2016/01/06 12:14
- 478.2 KB
- wif_v105_setup_addfilamentprofile.png
- 998×1133
- 2014/10/13 13:29
- 212.1 KB
- wiper_align.png
- 999×666
- 2015/07/01 10:21
- 898.7 KB
- wiper_upgrade.png
- 999×666
- 2015/07/01 10:21
- 897.6 KB
- workspace.png
- 997×1042
- 2014/10/01 08:53
- 89 KB
![[Wurzel]](/de/http/manual.slic3r.org/simple-mode/simple-mode-filament-settings?ns=&tab_files=files&do=media&tab_details=view&image=reprap-industrial-v1%3Amtc_idlerleverpreset.png){kind=link}
Datei
- Anzeigen
- Verlauf
- Datum:
- 2014/09/12 11:08
- Dateiname:
- mtc_idlerleverpreset.png
- Format:
- PNG
- Größe:
- 665KB
- Breite:
- 1055
- Höhe:
- 812
- Verwendung von:
- service-guide
- service-guide
- service-guide
Seiten-Werkzeuge
Falls nicht anders bezeichnet, ist der Inhalt dieses Wikis unter der folgenden Lizenz veröffentlicht: Creative Commons Attribution-ShareAlike 4.0 International License
